| n2n |
|
This translation is quick and dirty, send corrections to This e-mail address is being protected from spambots. You need JavaScript enabled to view it N2n is great VPN solution for everybody, who play games over network, need to connect computers together etc. It is highly flexible and easy to setup, it can make a connection even in situation where no connection is possible using other solutions. It works on similar basis as hamachi, You choice network name (georgsnet), password and n2n connects Your computers together the same way as Your computers were connected to local network. It can cross firewalls and NATs, connection works even if none of computers have public IP. Official site of n2n (authors Luca Deri and Richard Andrews): http://www.ntop.org/n2n Advantages: Freedom There is no limit of 16 users, no limit of groups You can connect to. There can be thousands users in one network (using custom network mask, if You use default network mask, maximum number of users in every network is 254), number of networks You can connect is limited only by it's count. Security Only edge users know password, it isn't stored anywere on server Flexibility You can choose IPs You use. You don't like 10.1.2.x? So You can use 192.168.34.x or any other lan IPs actually not used in your lan Compatibility n2n works on Windows, Linux, Macos To support spreading n2n we created (simple) n2n Gui and started Supernode (n2n server), which everybody can use fo free. n2n Gui install howto (for Windows 2000 a XP): 1. Download and install n2n Gui(0.35) - 11/25/2009 (64bit) changelog source (GNU GPL v3) There is also mingw compilled version available - n2n Gui(0.35 mingw) - 11/25/2009 n2n Gui setup howto: 1. Run n2n Gui, settings dialog appears. 2. In column supernode enter 88.86.108.50 and as port 82 (if You wish to use our supernode) 3. As local IP enter (for example) 10.1.2.abc* (see explanation below), as network name enter name of Your network (georgsnetwork) and don't forget to enter password too. Password and network's name should be a-zA-Z 0-9. * There is necessary to decide what IP every user in network uses. First user should use 10.1.2.1, second 10.1.2.2 and so on. All IPs must be from the same subnet (10.1.2), but it can be almost every lan subnet not actually used (192.168.0). 4. Click OK and restart n2n Gui (in context menu of n2n gui choose Quit and start n2n gui again). Setup is done and Your n2n should be running and fully operational. If You use disable compression feature in Advanced settings, don't forget to enable/disable it in entire network. FAQ: How to be sure that everything works? Try to use ping command to IP address You entered in setup, if ping works, try to ping to another computer connected to same n2n network. Don't forget to allow icmp in firewalls. How fast is n2n? n2n is as fast, as fast Your internet connection and internet connection of other people You connect to is. If one computer is connected to internet 4Mbit/sand second uses 2Mbit/s connection, You are able to communicate at 2Mbit/s. Are you authors of n2n? No, there is only simple gui and free supernode service from us. Is there technical support for your supernode? Yes, send Your questions and problems to This e-mail address is being protected from spambots. You need JavaScript enabled to view it Connection doesn't work Check network name and password in n2n setting. All users in one network must use the same network name and password. If connection doesn't work, try to disconnect, wait one minute and connect again. What are using conditions? If You use supernode at vpnhosting.cz, You agree with following conditions: You can't overload supernode, You can't use it for illegal purposes or with contrariety to good manners. You use supernode and n2n gui at Your own risk. You won't use supernode at vpnhosting.cz commercially, resell it, it can be used only for free. We can stop providing service at any time. |